某软基砂井堆载预压失效原因分析   总被引：2，自引：0，他引：2  

谢秋兰 《地质灾害与环境保护》2005,16(3):325-327

在某防洪工程的软基砂井堆载预压处理中,两预压段虽然采用相同的预压加固设计方案．但在预压加固后的检测中发现.其中一预压段预压效果良好,达到设计要求,另一预压段软土特性未能得以明显改善。通过比较分析后认为,砂井堆载预压效果影响因素有井径、井距、砂料、垫层及软土成分等因素,通过合理的设计和施工,能有效地对软基进行加固处理。  相似文献   

溪洛渡电站软弱夹层剪切强度分析研究   总被引：2，自引：0，他引：2  

黄志全  陈尚星  李华晔  姜彤 《地质与勘探》2005,41(4):98-101

岩体的力学强度参数,特别是软弱夹层剪切强度参数c、f的优化选取进行分析对比,对大型和特大型水电工程来说是非常必要的.本文采用多种力学参数选取方法讨论了溪洛渡水电站软弱夹层剪切强度参数c、f的取值问题,使剪切强度的选取有了更大的可比性,提高了c、f值的选取精度和可靠性.  相似文献   

低地应力区地下洞室开挖围岩剪应力静态数值模拟研究   总被引：2，自引：2，他引：0  

胡夏嵩  赵法锁 《地质与勘探》2005,41(1):85-88

本文以西北某市大型水利地下洞室工程为例,采用弹塑性二维有限元法对低地应力区洞室开挖后围岩剪应力分布与围岩变形破坏进行了数值模拟,总结出了低地应力区地下洞室开挖后围岩剪应力大小、分布规律与围岩变形破坏的关系.该项研究它将有利于进一步研究低地应力区地下洞室开挖后围岩稳定性,同时对保障地下洞室工程的圆满进行具有重要的理论价值和现实意义.  相似文献   

激光剥蚀电感耦合等离子体质谱分析石笋样品中多元素比值及45种元素含量   总被引：1，自引：0，他引：1       下载免费PDF全文

范晨子  胡明月  赵令浩  孙冬阳  蒯丽君  蔡炳贵  詹秀春 《岩矿测试》2013,32(3):383-391

石笋样品的微量元素含量及Mg/Ca、Sr/Ca比值为高分辨的古气候重建提供重要指标。针对现有溶液分析技术易混合多个石笋微层、误差大的缺点,本文利用激光剥蚀电感耦合等离子体质谱技术(LA-ICP-MS)原位线扫描和点剥蚀方式对比分析了石笋生长轴方向的Mg/Ca和Sr/Ca空间分布趋势,研究表明二者均展现出显著的周期性变化特征,且周期性变化一致,其中40 μm束斑线扫描更具有稳定性强、分辨率高、快速简便的优点。通过探讨碳酸盐标准样品MASC-3与玻璃标准样品NIST 610、NIST 612、KL2G、ATHO-G的相对灵敏度系数关系和元素分馏行为,确定基体效应是造成相对灵敏度系数变化的主要原因。同时建立了以MASC-3、NIST 610和NIST 612多外标结合内标Ca归一定量分析石笋中45种元素方法,针对石笋碳酸盐样品,将主量元素Ca、Mg变形为碳酸盐形式,与其他元素加和归一,不仅改变了国内外研究中需要预先采用其他分析技术来测定内标元素含量的计算方法,而且有效地避免了C元素无法准确检测的问题,能够实现与Ca内标法校正结果的吻合。  相似文献   

焦家金矿主矿区金矿石的赋存特征   总被引：2，自引：1，他引：1  

胡海祥  牛桂强  刘洪澜  刘海龙  王攀志 《岩矿测试》2013,32(6):931-937

焦家金矿带是莱州-招远金矿区最重要的金矿带之一,产状复杂且性状变化较大。以往研究主要针对矿物种类、载金矿物及其形状及嵌布关系等进行分析,缺乏对金粒矿物学、金矿物种类及金颗粒的成色研究。本文采用偏光/反光显微镜、体视显微镜、扫描电镜、能谱仪、X射线衍射仪等技术手段对焦家金矿主矿区深部开采的矿石样品进行分析,研究内容主要包括金赋存状态、金粒度、金形状、金矿物类型及不同大小金粒的成色特征。结果表明:载金矿物主要以黄铁矿、黄铜矿等硫化矿和石英、长石等脉石矿物为主。金赋存状态有裂隙金(64.82%)、包裹金(19.29%)、晶隙金(15.89%);黄铁矿、黄铜矿中金粒较大,连群分布占多数,脉石中金粒细小,孤立分布占多数。金矿物形状复杂,主要有球状金、三角形金、矩形金。金矿物种类丰富,以自然金、银金矿、自然银、含铁自然银为主,其次为金铜矿、螺硫银矿、碲化金银。金矿物粒度范围较大,大金颗粒可达到90~110 μm,小金颗粒只有2~3 μm。金银矿物的成色普遍较高,大粒金成色低,以银金矿为主,小粒金成色高,大都为自然金。本文丰富了焦家金矿矿物学研究的内容,为后续选冶工艺提供了调控依据和重要信息。  相似文献   

基于构造解析重建的四川呷村银多金属矿床模型     

党院  陈懋弘  毛景文  薛志强  李义邦  辛天贵  王康  高扬  吴学龙 《矿床地质》2013,32(6):1077-1092

四川省白玉县呷村银多金属矿床是中国著名的VHMS矿床之一,前人曾进行过详细的矿床模型研究。对于矿床下部脉状矿体大致呈层状平行于上部块状矿体的地质现象,前人曾提出"层状矿席+层控网脉状矿带"等模式。文章通过对呷村矿床地质特征的详细研究后认为,呷村矿床在印支期形成之后,遭受到燕山期弧-陆碰撞造山的强烈改造,导致矿区地层直立并倒转,并在能干性弱的流纹质火山岩中普遍发生层内韧性剪切变形,使原先近于垂直层状矿体和喷气沉积岩的下-中部脉状-网脉状矿体被构造置换为紧闭褶皱状、无根褶皱状、透镜体状,并近于平行于上部层状矿体。构造恢复表明,下-中部脉状-网脉状矿体原始三维形态为不整合的筒状或漏斗状,与上部层状矿体组成典型的"下筒上层"的"双层结构"。根据脉状-网脉状矿体和层状矿体的空间展布特征,在构造恢复的基础上重新建立了呷村VHMS矿床的双通道夹卤水池的矿床模型。该模型对矿区外围找矿有一定的指导意义。  相似文献   

Analyses d’ouvrages     

《Geodinamica Acta》2013,26(1):49-50

New structural data and P–T estimates of syn-deformational assemblages within the Beni Bousera peridotites and their crustal envelope are used to explain their Alpine exhumation. The Beni Bousera peridotites occur as thin sheets within high grade crustal units of the lower Sebtides (inner Rif, Morocco) and are composed of weakly deformed spinel lherzolite in the core of the massif and garnet-spinel mylonite at the rim. The main foliation trajectories in both the peridotites and overlying crustal units show systematic rotation towards their mutual contact, indicating a kilometer-scale top to the NW shearing with a dextral component along this crust/mantle contact. Widespread top to the NW shear criteria within the crustal units overlying the peridotite support this feature. Available ages constrain the development of the main foliation in both the peridotites and crustal rocks between 25 and 20 Ma. New P–T data from the peridotites show that deformation occurs during decompression from ≈ 22 kbar, 1050°C to ≈ 9-15 kbar, 800°C. As a consequence, exhumation of the Beni Bousera peridotites takes place during the Oligo-Miocene lithosphere thinning in the footwall of a lithospheric extensional shear zone. The exceptional preservation of garnet within the mylonitic peridotites results from rapid cooling of the border of the massif due to the juxtaposition with colder crustal rocks along this shear zone. Uplifting of the hot mantle rocks simultaneously induces high temperature metamorphism in the overlying crustal units. These new findings allow us to reconstruct the deformation history of the Beni Bousera region and the Alboran domain in the framework of the western Mediterranean geodynamics during the last 40 Myrs.  相似文献   

Evidence of late oligocene/early miocene backthrusting in the central alpine “root zone”     

Peter Heitzmann 《Geodinamica Acta》2013,26(3):183-192

Abstract

Two groups of stretching lineations can be distinguished in the Central Alpine " root zone " between Ticino and Mera :

1) Steeply plunging lineations formed during retrograde metamor-Phism under amphibolite/greenschist facies conditions indicate an uplift movement of the Central Alps. The lineations can be related to an important back-thrusting event of late Oligocene/early Miocene age.

2) Gently plunging lineations formed under lower greenschist facies conditions display a pattern typical of a dextral strike-slip system. These lineations are of early Miocene age.

This cpmbined movement, achieved by ductile deformation along the lnsubric line was followed by a stage of brittle deformation in a dextral strike-slip system (= Tonale line).

The signification of this interpretation is shown in a new crustal cross section through the Central Alpine/Southern Alpine border zone in the Iicino area.  相似文献   

S-wave velocity images of the Dead Sea Basin provided by ambient seismic noise     

《Journal of Asian Earth Sciences》2013

Based on passive seismic interferometry applied to ambient seismic noise recordings between station pairs belonging to a small-scale array, we have obtained shear wave velocity images of the uppermost materials that make up the Dead Sea Basin. We extracted empirical Green’s functions from cross-correlations of long-term recordings of continuous data, and measured inter-station Rayleigh wave group velocities from the daily correlation functions for positive and negative correlation time lags in the 0.1–0.5 Hz bandwidth. A tomographic inversion of the travel times estimated for each frequency is performed, allowing the laterally varying 3-D surface wave velocity structure below the array to be retrieved. Subsequently, the velocity-frequency curves are inverted to obtain S-wave velocity images of the study area as horizontal depth sections and longitude- and latitude-depth sections. The results, which are consistent with other previous ones, provide clear images of the local seismic velocity structure of the basin. Low shear velocities are dominant at shallow depths above 3.5 km, but even so a spit of land with a depth that does not exceed 4 km is identified as a salt diapir separating the low velocities associated with sedimentary infill on both sides of the Lisan Peninsula. The lack of low speeds at the sampling depth of 11.5 km implies that there are no sediments and therefore that the basement is near 10–11 km depth, but gradually decreasing from south to north. The results also highlight the bowl-shaped basin with poorly consolidated sedimentary materials accumulated in the central part of the basin. The structure of the western margin of the basin evidences a certain asymmetry both whether it is compared to the eastern margin and it is observed in north–south direction. Infill materials down to ∼8 km depth are observed in the hollow of the basin, unlike what happens in the north and south where they are spread beyond the western Dead Sea shore.  相似文献   

阿姆河右岸东南部吉萨尔山前中下侏罗统构造格架及成因分析     

陆诗阔  包子鹤  杨俊生 《新疆地质》2013,(3)

以现有地质及地震资料为基础,对阿姆河右岸区块东南部靠近吉萨尔山前地区的中下侏罗统主要构造特征进行探讨,一方面有利于促进该区中下侏罗统油气勘探,同时也有利于深化对造山带向盆地过渡的山前地区构造变形规律的认识。研究表明：该区中下侏罗统整体表现为由三列近似呈雁行状排列的NE向背斜带组成的褶皱-冲断构造。从控制背斜构造发育的断裂活动特征看,东部山前断层表现为由南东向北西方向逆冲,活动强度大,向西逆断层运动的强度逐渐减弱,且由南向北西部断层的逆冲运动方向发生反向变化,在研究区的北部发育典型的构造三角带。西部背斜带可视为断裂运动方式由南向北变化导致的调节构造。沿构造带走向,三列背斜构造高点由南向北逐渐升高。通过对中下侏罗统构造变形与上覆地层构造特征的比较,结合该区侏罗系沉积特征,认为中下侏罗统构造变形是与上覆地层构造变形共同形成于新近纪喜山期统一的区域构造运动背景下。其主要构造变形机制是晚古近-新近纪以来,在印度板块、阿拉伯板块和欧亚板块碰撞远程效应影响下,受吉萨尔山脉的隆升挤压和研究区北部NW向的大型断裂如布哈拉断裂、曼格什拉克断裂的右旋压扭共同作用而成。  相似文献